Installed a Toureg/Passat style retractable outlet.

42 Draft Designs Engine Cover Hardware Kit. This is actually the kit for a 225 with one additional medium washer and a 25mm long screw.

I used 4 -Zinc/Yellow Pltd Steel Slotted Body Rivet Nut M6 X 1.0 Internal Thrd, 0.50-7.10mm Material Thick, that I ordered from McMaster-Carr. These can be attached to the stock metal brackets. There is one more lower engine cover bolt, but it is hidden from view by the top engine cover, so the stock hardware can be left in place in that location.

1.0 Internal Thrd, 0.50-7.10mm Material Thick, that I ordered from McMaster-Carr. These can be attached to the stock metal brackets. There is one more lower engine cover bolt, but it is hidden from view by the top engine cover, so the stock hardware can be left in place in that location.

Installation sequence on Brembo GT Front Brake Systems

I've had my TTDA for a little over 2.5 years, but never completed the front cold air feeds. One has always been routed into the wheel well.

RT Performance Gauge Pod with Autometer Vacuum/Boost gauge and Autometer A/F Ratio gauge.

Falkens and Toyo T1-S

VHT Nightshades 3 coats, plus 4 coats of clear.

Followed the writeup from VW Vortex Tinted Tails http://forums.vwvortex.com/zerothread?id=726527.

TTDA - Twin Tube Dynamic Airbox
BAMM - Big Ass MAF Mod
BM - Boose machine

All available from The Modshack http://www.modshack.info/

All available from The Modshack http://www.modshack.info/